FORKLIFT TIRES
PRESS ON
RESILIENT
TRA RESILIENT SPECS
PNEUMATIC/AIR
MOLDED ON TIRES
AIRCRAFT RETREADS
SKID LOADER TIRES
PNEUMATIC/AIR
SEMI-PNEUMATIC
MOLDED ON TIRES
AIRCRAFT RETREADS
LOADER TIRES
SEMI-PNEUMATIC
AIRCRAFT RETREADS
TIRE CODES
SIZE EXPLAINED
PRINCETON/PIGGY-BACK
BOOMLIFTS/ TELEHANDLER
MOLDED ON TIRES
UTILITY/GOLF & BAGGAGE CART
MAN-TOTER
TRACKS OTT & DEDICATED
DEDICATED-RUBBER
RUBBER OTT
STEEL & RUBBER PADDED
CARE FOR TRACKS
CONSTRUCTION
SKID LOADER TIRES
LOADER TIRES
TRACKS OTT & DEDICATED
AIRCRAFT RETREADS
LUMBER YARD
NEW WHEELS/ RIMS
WHEEL MEASUREMENTS
HOW TO MEASURE
TIRE CHAINS
FLAT PROOFING
INTERNATIONAL
Terms & Conditions
Privacy Policy
Solid Tires for use on Pneumatic Tier Rim Contours |
||||
Maximum Tire |
Maximum Tire Load Rating (Lbs) |
|||
| Tire Sizes | Section Width (Inches) |
Outside Diameter (Inches) |
Load Wheel (6 MPH) |
Load Wheel (10 MPH) |
| 500 x 8/3.0 | 5.75 |
18.46 |
1,935 |
|
| 600 x 9/4.0 | 6.90 |
21.46 |
4,230 |
3,065 |
| 21 x 8 - 9/7.0 | 8.16 |
21.06 |
6,190 |
4,480 |
| 23 x 8-10/6.5 | 8.00 |
22.88 |
7,290 |
5,280 |
| 23 x 9 - 10/6.50 | 8.86 |
23.43 |
7,525 |
5,450 |
| 650 x 10/5.0 | 7.00 |
23.50 |
5,810 |
4,210 |
| 700 x 12/5.0 | 7.57 |
26.88 |
6,640 |
4,810 |
| 23 x 10 - 12/8.0 | 10.10 |
23.50 |
8,820 |
6,385 |
| 700 x 15/5.5 | 8.05 |
29.88 |
7,905 |
5,725 |
| 700 x 15/6.5 | 8.05 |
29.88 |
9,340 |
6,765 |
| 825 x 15/5.5 | 9.30 |
33.36 |
9,200 |
6,665 |
| 825 x 15/6.5 | 9.30 |
33.36 |
10,875 |
7,875 |
| 815 x 15/7.0 | 8.70 |
27.80 |
8,360 |
6,055 |
| 10.00 x 20/6.5 | 10.95 |
42.23 |
13,825 |
10,010 |
| 10.00 x 20/8.0 | 10.95 |
42.23 |
17,015 |
12,320 |
| 12.00 x 20/8.0 | 12.40 |
45.10 |
18,605 |
13,475 |
| 12.00 x 20/10.0 | 12.40 |
45.10 |
23,255 |
16,840 |
| 14.00 x 24/8.0 | 14.75 |
53.84 |
22,500 |
16,295 |
| 14.00 x 24/10.0 | 14.75 |
53.84 |
26,130 |
20,365 |
| 250 x 15/7.0 | 9.84 |
28.94 |
9,615 |
6,960 |
| 250 x 15/7.5 | 9.84 |
28.94 |
10,300 |
7,460 |
| 300 x 15/8.0 | 12.75 |
33.00 |
13,190 |
9,550 |
| * Section width of tire may be substantially less than the dimensions shown. ** Outside Diameter Tolerance = + 0% -5% Taken from the Tire and Rim Association Inc. book 1997 |
||||
